medin-NC3 is the first turbine-driven CPAP device for non-invasive respiratory support for premature infants and newborns. The high-performance turbine makes the device independent of a fixed compressed air supply.
В режимах nCPAP от вас требуется только одно – установить желаемое давление CPAP. Поток будет регулироваться в зависимости от состояния пациента и потенциальных утечек. Это предотвращает непреднамеренное образование пикового давления, гарантирует эффективную компенсацию утечек и помогает снизить потребление кислорода. Регуляция потока происходит быстро благодаря высокой чувствительности измерения давления.
Apnea is detected by MediTRIG. As a result, breaths are automatically triggered to stimulate breathing. Frequency, pressure level and breath duration can be individually adjusted.
In addition to the PEEP, breaths with fixed settings (pressure level, duration, frequency) are administered. These breaths have a higher pressure level and are not emitted in a synchronized manner.
nHFT describes the supply of heated and humidified breathing gas via a nasal cannula. The gas flow administered is thus higher than the patient’s inspiratory respiratory flow. In neonatology, a flow of more than 1 LPM is considered to be high-flow therapy, while for adults, correspondingly higher values should be applied.
The difference between the SNIPPV mode and the NIPPV mode is that in this case, an automatic push is triggered synchronously with inspiration. Ventilation is provided here on two different flow and pressure levels synchronized with the patient's inhalation. The intensity of the second level as well as the changeover frequency and the time spent at the higher level can be adjusted by the user. In addition, the Leak-Assist can additionally be switched on.
The MediTRIG respiratory trigger was specially developed by medin for use in premature infants and newborns. Through the combination of the pressure measurement in the Medijet® generator and the signal processing in the medin nCPAP devices, MediTRIG works without additional sensors.
MediTRIG detects central as well as obstructive apnea.
The high-performance turbine makes medin-NC3 independent of a fixed compressed air supply.
The medin-NC3. Sync & Connect can send data (mode settings, measured parameters and alarms) to external devices via the HAMILTON Block protocol and RS232.
